Pieps DSP Pro Avalanche Transceiver

out of Stock
PRICE: $374.95
Pieps DSP Pro Avalanche Transceiver
PRICE: $374.95


  • free return
  • free 2 day
  • lifetime

Have a quick question?
Shoot us a text at (714) 928-7389

* Rural, PO Box, and specific state location based exclusions


The DSP PRO has the maximum digital range. Direction and distance indication from the initial detection. 3 antennas allow exact fine search. Search strip width: 55m. Maximum range: 60m. Motion sensor for inclinator and optimized power supply. Self-check: all major functions are tested during power-on. Frequency measurement for extended transceiver check. Check and update to the latest firmware on your PC/Mac. Battery lifetime min: 200h send mode.

Send Mode. Intelligent transmitter/Auto-antenna-switch: A disorder of the transmit antenna will result in an automatic switching to other antenna. Signal adjustment: A buried DSP PRO recognizes other devices buried nearby. The signal will be set exactly into the signal break of other device to have signals separated. iProbe support: The DSP PRO can be deactivated by the probe. The receiver automatically indicates next strongest signal.

Search Mode. Due to circular receiving range the first signal is received as fast as possible. The reliable direction/distance indication leads directly into vicinity of the transmitter. The big range of the 3rd antenna guarantees exact pinpointing. Transceivers transmitting at the edge of the standard EN300718 are not disadvantaged by the DSP PRO. The Mark function gives best support in multiple burials: once a transceiver is located it can be "marked" and the next signal indicated on the display. Old device mode: Elder transceivers have a continuous signal included that cause a negative effect to the Mark function. The DSP PRO recognizes such a device and it is indicated with flashing victim indication. The Scan function gives an overview of all the buried devices within the detectable range.

Additional Functions: The frequency of all other beacons can be checked. The deviation from the standardized frequency 457 kHz is indicated. TX600 support: Pieps TX600 is a mini-transmitter for dogs/equipment that transmits out of the standard EN300718 and can be received with every DSP PRO.

Short Description
  • Transmission frequency 457 kHz (EN300718)
  • Temperature range: -20°C to +45°C
  • Power supply 3 batteries, Alkaline (AAA), IEC-LR03, 1.5V
  • Dimensions: (LxWxH) 115 x 74 x 27 mm
  • Weight: 200g (incl. batteries)
Part Number
Brand Name


Add your review

Overall Rating

What do you think about this product ?


You Might Also Like